Classic SAE 30 Running-In Mineral Oil
CLASSIC RUNNING IN OIL 30
A mineral based running in oil for vintage and classic engines designed for the initial running in of re-built engines.
Use for initial running in of re-built engines. Formulated for running in on the road. Can be used for test bed running. Run engine at peak torque to ensure maximum bedding-in of piston rings. Drain and refill with the Millers Classic lubricant most suita
- High quality mineral oil formulated to solve the problems experienced when reconditioned engines do not bed-in.
- Provides full protection to highly stressed valve gear and associated components whilst allowing piston rings to bed in against the bore.
- Good running in will optimise the performance and fuel efficiency of a reconditioned engine.
- Very low leak down (4%) obtained after thorough running in process.